Sunday 28 April 2013

Maker Faire UK 2013

This weekend is the UK Maker Faire, held at the Centre for Life in Newcastle upon Tyne.  This is the second time I've been (I went to the last one, in 2011), and it's great!  There's loads to see and do, and what I've got to show here is just a fraction, but I hope will give you a flavour of the day.

Starting outside the building, there was the fire breathing robot dragon back again:


This time accompanied by a robot horse, complete with (living) jockey:


There was the Noisy Toys tent:


It may not look much, but it was LOUD!

Action painting (i.e. firing paint at a screen out of a small cannon):


Laser cut dinosaurs:


And I have no idea what this is or what it's meant to do as I missed the advertised shows:


Indoors, there were of course the Daleks:


It wouldn't seem right without them!

There was a lot of 3D printing this year, but this was a bit different - a 3D printer made from Lego and printing pancakes:


Neon artist Sarah Blood was demonstrating shaping glass tubes:


And alongside other works, had a neon tube baked in a cake:


There were a lot of robots this year too, including, rather dodgily, some robot pole dancers:


As my sister pointed out, this manages to demean women and robots simultaneously, which is quite a feat.

Moving on, textile crafts were represented too, with a quilting group present:


And another robot, this time knitting:


Knitted innards:


And more robots:


This is a musical instrument, the AlphaSphere:


I'd expected it to be a sort of drum machine but it isn't - it sounds like a synthesiser.  The chap giving the demonstration was playing some pretty impressive tunes with it.

This on the large National Museum of Computing stand took me back:


The BBC Micro.  Anyone in the UK of a certain age and of a geeky turn of mind (such as me) will remember the Beeb fondly.  In the real world I have a Masters degree in computer based information systems and job in web development and management, and it all started learning to code one of these in the 1980s.

With apologies for the blurry photo, the Raspberry Pi:


The hope is that this will inspire a new generation to learn to love computers, the way the BBC Micro did for so many of us.

Before I get too misty-eyed, a range of terrific 3D-printed bits and bobs from Shapeways:


If you're wondering, the thing at the front is a miniature Strandbeest; I want one!

Another robot, and despite the work that's clearly been put into it, I found it really creepy:


A big challenge for the makers of robots is going to be to get us to accept them, I think.

And finally, an overview of just part of the Faire:


It was enormously good fun, and I can thoroughly recommend going to any held in your area.  I'm looking forward to the next UK one already!

Sunday 21 April 2013

Lindisfarne Stones: left hand side

Or part of it, anyway.  To the bottom of the first bump:


Then to the base of the ear:


And to the top of the bottom of the ear:


There doesn't look like far to go, but there are a lot of hours of work in that...

Saturday 13 April 2013

Lindisfarne Beasts: up the side and along the top

Still stitching away, with more progress to show you.

First, to the top of the dog's head:


And then the top section, above the dogs:


I'll go back and do the section between the dogs when I do all the pointy bits at the end.

The left side next - the end is almost in sight.

Sunday 7 April 2013

Lindisfarne Stones: up the side

I have been doing a lot of sewing the last few days, to try and make some progress, and I am, though there's still a long way to go.

Anyway, since last time I have got part of the way up the side, to the base of the pointy bits:


Then over the end of the dog's ear:


And then all the way up the side to the top of the ear:


I'm really pleased with how it's coming along, but there's still a lot to do.

Monday 1 April 2013

Lindisfarne Stones: starting the top

With all the sides done, it's time to start the top.  This is going to take a lot of work, but at least it's a different shape, for a bit of interest!

Still the same technique, colours, threads and pattern, though, so not that different.  Starting at the bottom:


Then up to the base of the cut out section:


I want to go as far as I can with one length of couched thread running off the reel (I could say that it's to minimise waste, but really it's just because I want to see how far I can get in one go), so up the right side next:


I'll go back and do the pointy bits later.

Still a long way to go, but you can start to see the idea.